Model Based Systems Engineering Coursera

Model Based Systems Engineering Coursera Answer. In this post you will get Quiz Answer Of Model Based Systems Engineering Coursera

 

Model Based Systems Engineering Coursera

Offered By ”University at Buffalo”

Enroll Now

MBSE: Model-Based Systems Engineering –Week 1 Quiz

 

1.
Question 1
Mark all that are correct. A system of systems…

2 points

  • is a hierarchy of elements
  • has elements that are managerially independent
  • has elements that are operationally independent
  • has elements that are managerially dependent
  • has elements that are operationally dependent

===================================================

 

2.
Question 2
Which of the following are models that manage the processes within and across lifecycle stages? Select all that apply.

2 points

  • Waterfall model
  • Spiral model
  • Vee model

===================================================

 

3.
Question 3
Which one of the following is a false statement?

2 points

  • The emphasis of technical process is on transforming the needs of stakeholders into a product and service.
  • Organizational Project-Enabling Processes focus on resources required to successfully accomplish project goals.
  • Technical Management Processes formalize methods of agreements between organizations

===================================================

 

4.
Question 4
Which one of the following statement is incorrect?

2 points

  • Now a days, the pace of development / market penetration has increased.
  • Business impacts include quality, reduced cycle time, and less rework.
  • MBSE: Model-Based Systems Engineering MOOC is the only resource available to learn more about Systems Engineering

===================================================

 

5.
Question 5
Which one of the following statements is false?

2 points

  • When Systems Engineering goes right, people tend not to notice
  • The ideal level of systems engineering effort for projects is around 44% of total program costs.
  • Managing risk is important.

===================================================

 

6.
Question 6
Error correction in testing is approximately _____ times the amount required to correct the issues before design process starts.

2 points

  • 10 to 15 times
  • 21 to 78 times
  • 100 to 200 times
  • None of the above

===================================================

 

7.
Question 7
According to ISO/IEC/IEEE 15288 standards, ______ are defined as “man-made, created and utilized to provide products or services in defined environments for the benefit of users and other stakeholders.”

2 points

  • products
  • annotations
  • paradigms
  • systems

===================================================

 

8.
Question 8
_______ are measured by the ability to meet the needs of customers, end users, and other stakeholders.

2 points

  • Attributes
  • Successes
  • Databases
  • Definitions

===================================================

 

9.
Question 9
_________ is repeating one or more processes in order to improve a design by using newly available information.

2 points

  • Extraction
  • Iteration
  • Association

===================================================

 

10.
Question 10
Technical management process focus on managing the allocated ___________ to fulfill commitments made in agreements.

2 points

  • resources
  • systems
  • requirements

 

 

Week 2 Quiz

1.
Question 1
True or False?

Traditional systems engineering focuses on creating and managing documentation about a system whereas Model-Based Systems Engineering (MBSE) focuses on developing, managing, and controlling a model of the system.

2 points

True

False

===================================================

 

2.
Question 2
What are the pillars of SysML?

2 points

Structure

Behavior

Requirements

Parametric

Megadata

===================================================

 

3.
Question 3
Which of the following are true?

2 points

Generally, costs committed, costs incurred and product knowledge rise over the time of product development.

Generally, costs committed, costs incurred and product knowledge decrease over the time of product development.

Generally, the ability to change a product increases over its develolpment time

Generally, the ability to change a product decreases over its development time

===================================================

 

4.
Question 4
True or False?

MBSE frameworks can focus only on single component.

2 points

True

False

===================================================

 

5.
Question 5
_________ is the determination that each element of the system meets the requirements of a documented specification.

2 points

Verification

Validation

===================================================

 

6.
Question 6
________ is the determination that the entire system meets the needs of the stakeholders.

2 points

Validation

Verification

===================================================

 

7.
Question 7
Validation ensures you built the right system. True/False

1 point

True

False

===================================================

 

8.
Question 8
Verification ensures you built the system right. True/False

1 point

True

False

===================================================

 

9.
Question 9
The _________ diagram, modified from the UML Activity Diagram, specifies the transformation of inputs to outputs through a controlled sequence of actions.

2 points

activity

SysML activity

megadata

===================================================

 

10.
Question 10
The state ___________ diagram is used to represent the lifecycle of a block and event-based behavior – like switching something on or off.

2 points

machine

operating

3D

===================================================

 

11.
Question 11
From the perspective of the Department of Defense, a __________ is “a physical, mathematical, or otherwise logical representation of a system, entity, phenomenon, or process”

2 points

part

design

product

model

 

 

Week 3 Quiz

1.
Question 1
The digital manufacturing and design paradigm uses computer-based technologies to build the MBE systems architecture, with linkages between (Select all that apply)

2 points

Product Data Management (PDM)

Product Lifecycle Management (PLM)

Manufacturing Process Management (MPM)

Manufacturing Execution Systems (MES)

===================================================

 

2.
Question 2
STEP can represent an enormous variety of data, including:

(Select all that apply)

2 points

Geometric information

Product manufacturing information

Product lifecycle support information

Prices of the product

===================================================

 

3.
Question 3
WHich of the following is/are true?

2 points

In a Model-Based Enterprise, it is challenging to exchange 3D geometry using open standards.

The Digital Thread is the backbone of a MBE.

A 3D PDF does not make it possible to digitally capture model information.

A 3D PDF makes it possible to digitally share model information.

===================================================

 

4.
Question 4
The three principal activities involving Model-Based Definition (MBD) data are exchange, ________ , and communication.

2 points
Enter answer here

visualization

===================================================

 

5.
Question 5
True or False?

In design, the model based definition (MBD) begins and evolves throughout the design cycle of a product.

2 points

True

False

===================================================

 

6.
Question 6
Benefits of MBE are:

(Select all that apply)

2 points

reduced cost

reduced design cycle time

better quality

===================================================

 

7.
Question 7
Which is/are true of small businesses?

2 points

Small businesses should rush to implement MBE

Small businesses can not benefit from MBE

Small businesses can achieve MBE without significant investment.

===================================================

 

8.
Question 8
True or False?

3D technical data package can provide the foundation for reuse of only a few steps in product life cycle

2 points

True

False

===================================================

 

9.
Question 9
During the production stage of MBE, the annotated product model must be effectively communicated to the supply chain. This is done through the _____________ .

2 points

3D model

system’s organization

design activities

technical data package

===================================================

 

10.
Question 10
_____________ is an integrated and collaborative environment, founded on a Model Based Definition shared across the enterprise, enabling rapid, seamless, and affordable deployment of products from concept to disposal.

1 point

Model-Based Enterprise

Change Management

Design Documentation Management

Configuration Management

 

 

Week 4 Quiz

1.
Question 1
Which of the following is/are true statements?

2 points

There is only one MBE self assessment tool

Model Centric covers level 3 and 4 in the assessment tool

An MBE assessment tool can be used to determine where, within technology advancements, a company rests.

===================================================

 

2.
Question 2
It doesn’t matter whether you use ______ or ______, Some kind of checking is needed to ensure you have a high quality TDP and accurate data contained within it. Select the two that apply.

1 point

Manual Checking Processes

2D Drawings

Double Checking

Supplemental Checking

Software-based Checking

===================================================

 

3.
Question 3
Which of the following is/are not true?

2 points

DFM tools are used to determine how a feature can be produced.

The last subcateory of design activities is the product definition.

===================================================

 

4.
Question 4
True or False?

Change management is mostly managed within separate databases for Levels 2, 2D, and 3D.

2 points

True

False

===================================================

 

5.
Question 5
A manufacturing process plan_is usually defined in routing and stored within ERP or MES _______________________.

2 points
Enter answer here

system

===================================================

 

6.
Question 6
Which is/are true of Quality Planning and Manufacturing Planning?

2 points

They are not highly dependent upon each other.

They are not inter-related.

None

They are inter-related

They are highly dependent upon each other.

===================================================

 

7.
Question 7
What category do the following fall under?

Quality Planning
Inspection Code Generation
Quality Requirements Data Management
Receiving Inspection
Supplier Quality Certification
2 points

Quality Manufacturing Operations

Quality Manufacturing Facilities

Quality Requirement Planning Activities

Quality Enterprise Activities

===================================================

 

8.
Question 8
Which of the following benefits from having a single source of information in the model?

2 points

Technical Manuals

Product Spares

Purchasing

All of them benefit

===================================================

 

9.
Question 9
___________ engineers need to design shipping containers and other provisions to facilitate shipping product to customer.

2 points
Enter answer here

A shipping container

===================================================

 

10.
Question 10
Finite Element Analysis is a computational tool or method for performing ___________________ analysis on component and systems, in steady or transient state.

2 points

engineering

digital

requirement

 

 

Other Questions Of This Category